Process technology



Sintering is the process of compacting and forming a solid mass of material by heat or pressure without melting it to the point of liquefaction.

Sintering is effective when the process reduces the porosity and enhances properties such as strength, electrical conductivity, translucency and thermal conductivity。 During the firing process, atomic diffusion drives powder surface elimination in different stages, starting from the formation of necks between powders to final elimination of small pores at the end of the process。

Sintering is part of the firing process used in ceramic objects, which are made from substances such as glass, alumina, zirconia, silica, magnesia, lime, beryllium oxide, and ferric oxide。 Some ceramic raw materials have a lower affinity for water and a lower plasticity index than clay, requiring organic additives in the stages before sintering。




Prve:Grinding

Nest:Pressing

Contact Us

/Uploads/202004/5e8e7b777fe64.png

contact us

Copyright © 2020 All Rights Reserved St.Cera Co., Ltd
江苏11选5开奖结果 江苏11选5走势图 江苏11选5开奖结果 江苏11选5投注 江苏11选5app 江苏11选5 江苏11选5走势图 江苏11选5app 江苏11选5走势图 江苏11选5